A budget kitchen remodel in Palm Beach County is not a cheaper version of a full remodel. It is a different project: the layout stays where it is, and the money goes into the things you see and touch every day. Done that way, a kitchen can look and work like new without paying to move plumbing, gas and walls.
The short answer. At KMR Enterprises, a budget kitchen means a refresh: new or refaced cabinets, new countertops and backsplash, appliances in their existing spots and updated lighting. A small kitchen starts around $15,000, and a refresh of a typical kitchen runs up to roughly $60,000. Once the sink, range or walls move, the project becomes a full remodel, which runs roughly $60,000 to $120,000.

How much does a budget kitchen remodel cost in Palm Beach County?
These are the ranges KMR uses in its own estimates, and they match our 2026 kitchen remodel cost guide. KMR has completed kitchens from about $20,000 to more than $300,000. We price each option separately, from a budget version up to the full wish list, so you can see exactly what each choice adds.
| Project type | Typical range | What changes | Permit |
|---|---|---|---|
| Refresh (budget) | From about $15,000 for a small kitchen, up to roughly $60,000 | Cabinets replaced or refaced in place, new countertops and backsplash, appliances in existing spots, updated lighting | Often none for cosmetic swaps; required once plumbing, gas or circuits change |
| Full remodel | Roughly $60,000 to $120,000 | New layout: island added, wall opened, plumbing and electrical moved | Required |
| Luxury and structural | $120,000 and up | Custom cabinetry, specialty surfaces, panel-ready appliances, load-bearing walls, gas relocation | Required, often with engineering |
What is the single biggest way to save on a kitchen remodel?
Keep the layout. Moving a sink ten feet costs more than upgrading every countertop in the room, because every fixture that moves pulls new plumbing or gas lines, electrical work, inspections and patching behind it. When the sink, range, refrigerator and dishwasher stay where they are, the permit gets simpler and the schedule is measured in weeks instead of months.
Keeping the layout does not mean keeping the way the kitchen works. Swapping a run of base cabinets for deep drawers, adding pull-outs and a pantry cabinet, or turning a peninsula into seating can change how the room works without moving a single pipe.


Where can you save on a kitchen remodel?
Reface or replace selectively
If the cabinet boxes are sound and the layout works, refacing in place (new doors, drawer fronts and hardware) usually costs less than tearing out every cabinet. Replace only the runs that are damaged or need to change size.
Choose standard cabinet sizes
Cabinetry is usually the largest line in a kitchen, commonly a quarter to a third of the total. Semi-custom lines in standard widths cost less than fully custom boxes and arrive on a more predictable schedule.
Keep appliances in their openings
Appliances are the easiest place to swing a budget by tens of thousands of dollars in either direction. Freestanding models that fit the existing openings avoid cabinet changes and new circuits. Panel-ready and pro-style units are where budgets climb.
Spend on the surfaces you touch
Countertops, backsplash and hardware are what make a kitchen feel new. A mid-range quartz or granite with a clean backsplash usually gives the biggest visible change per dollar.
Update lighting in place
New fixtures in the existing ceiling boxes, plus under-cabinet lighting where the wiring allows, brighten the room without opening the ceiling.
Leave sound flooring alone
If the floor runs through the rest of the house and is in good shape, keeping it avoids a cost that spreads well beyond the kitchen.

Where should you not cut corners on a kitchen remodel?
Permits and inspections
Cosmetic swaps generally do not need a permit. Anything that moves plumbing, gas or electrical circuits does. Unpermitted work surfaces at sale time and costs more to fix than the permit would have. See how permits work in Palm Beach County.
The electrical panel
Older homes in Palm Beach County, especially in Delray Beach, often need panel work before a modern kitchen's load is legal. You will never see it, but it is not optional.
Installation
Level, square, well-fastened cabinets are what make affordable doors look expensive. Labor is the wrong place to bargain hunt.
What is behind the sink
Supply lines, shutoff valves and the cabinet floor under the sink are cheap to replace while everything is open and expensive to repair after a slow leak.
A licensed contractor
Florida requires a licensed contractor for permitted work. Look up the license on the state's DBPR site and ask how the price is broken down before you sign.
What do Palm Beach County kitchens cost that national guides miss?
Three local costs show up in Palm Beach County kitchens that national cost calculators leave out:
- Permit time. Getting a kitchen permit typically takes 6 to 8 weeks or more. Hiring a private provider to handle plan review and inspections adds about $1,500 on a typical kitchen and can save 4 to 8 weeks on overall completion.
- Code-driven electrical upgrades in older homes, which often have to happen before the new kitchen can pass inspection.
- Condo and HOA logistics. Elevator reservations, certificates of insurance, working-hour limits and board approvals all add cost and time, especially in the buildings east of Federal Highway.

How does KMR run a budget kitchen remodel?
We set the price while the design is being drawn, not after. That is the core of design-build: the same team designs, prices, permits and builds the kitchen, so a cabinet change or an appliance swap is a known cost before anything is ordered.
- Site visit. We measure, check the panel, the plumbing and what the cabinets are fastened to, and talk through what is not working.
- Two prices. A budget version and a wish-list version, each broken into cabinetry, surfaces, appliances, trades and permit costs.
- Selections. Cabinets, countertops and appliances are chosen and ordered before demolition, so the kitchen is not torn out while you wait on parts.
- Permit, if needed. We pull it, answer the reviewer and schedule inspections.
- Build and walkthrough. Demolition, install, final inspection where required, then a walkthrough of the finished kitchen.

Whoever you hire, ask each bidder to split their number into cabinetry, surfaces, appliances, trades and permit costs. A contractor who cannot break the number apart does not control it. Before you compare bids, read how a kitchen remodel is planned so every bid covers the same scope.
How can you pay for a kitchen remodel?
Most homeowners use savings, a home equity line of credit, a cash-out refinance or a staged payment schedule with the contractor. Our guide to financing a home remodel compares the options for South Florida homeowners.
Frequently asked questions
How much does a budget kitchen remodel cost in Palm Beach County?
A refresh that keeps the layout starts around $15,000 for a small kitchen and runs up to roughly $60,000 for a typical one. Moving the layout pushes most projects to $60,000 to $120,000.
Is refacing cabinets cheaper than replacing them?
Usually, when the cabinet boxes are sound and the layout works. Refacing replaces doors, drawer fronts and hardware in place. If the boxes are water damaged or the layout is changing, replacement is the better use of the money.
Do I need a permit for a budget kitchen remodel?
Cosmetic swaps generally do not need one. Moving or adding plumbing, gas or electrical circuits does, and the city or county inspects that work.
How long does a budget kitchen remodel take?
A refresh typically runs three to six weeks of construction. If the work needs a permit, add the permit time, typically 6 to 8 weeks or more.
Can I finance a kitchen remodel?
Yes. Common routes are a home equity line of credit, a cash-out refinance or a staged payment schedule with the contractor. Our financing guide compares them.
Want a budget price and a wish-list price side by side?
Design-build general contractor in Delray Beach, FL. Remodels, additions, ADUs, custom homes and commercial build-outs across Palm Beach County.
KMR Enterprises, Florida Certified General Contractor CGC1520685. Call (561) 288-5000 or book a kitchen consultation.
